Back in 1989 when we started Supercross BMX, the original frame was our 6 bar design. We used this design for over a decade on our Cro-mo and Aluminum BMX race Frames.
When we designed the SX250, we were limited on tube sizes that the Steel Mills were running, and had to solve the problem of frame flex and stiffness, so the extra triangulation is what we did. By lowering the first set of seat stays and adding the second set of stays for additional triangulation, we had a BMX race frame that was stiffer, faster accelerating and better handling that the other ones on the market.
Since we discontinued the use of the 6 bar rear end and the secondary seat stays, we have always been asked to make a re-issue. So here it is. For our 30 year anniversary, not only are we re-introducing a limited run of the 6 Bar SX250's , we are upping the ante a bit. It is not an old school wall hanger, but an actual modern race frame, and we got TANGE back on board to build us a few more of the Prestige® Tubesets and have built them into the ultimate Retro Race bike.
Full Heat Treated post weld construction, Campy® Style Integrated Headtube, CNC Machined Euro BB shell, and the famous 6 bar rear end.
And as a special treat, we are building up some very limited edition complete Retro SX250 bikes with some of these frames. A limited edition Pro XXL and a Limited Edition 29" Wheeled one. Sorry Todd, SE isn't the only one that can enjoy #Bikelife.
Frame : Supercross SX250 Tange Prestige Pro XXL
Fork : Supercross BMX Pro - Heat Treated Cro-mo
Headset: Token Sealed Bearing Campy® Integrated Style
Stem: Supercross "1989" 30 year Anniversary Edition
Bars: Supercross " 1989" Heat Treated Pro Bars
Grips: A'me Tri
Brake Lever: Tektro 2 Finger Alloy
Brake Cable: Linear Teflon lined
Brake: Alloy V- Brake
Front Tire: Tioga "Yellow Label" Skin Wall Comp 3 - 20x2.125
Rear Tire: Tioga "Yellow Label" Skin Wall Comp 3 - 20x1.75
Rims: Alex Double Wall Alloy
Hubs: Sealed Bearing High Flange Alloy
Freewheel: 4 key 3/32nd 17t
Chain: KMC Z-1 3/32nd
Crank: Redline Flight Crank - 175mm
BB: Euro Sealed Bearing w/ Heat Treated Cro-mo Spindle
Chainwheel: Tiger Teeth Ryan Sheehan Replica - 47t x 3/32nd
Pedal: Sealed Bearing Alloy Platform, Heat Treated Cro-mo Spindle
Seatpost Clamp: Alloy Single Bolt:
Seatpost: Alloy Micro Adjust 27.2x300
Saddle: Padded Turbo Style - Railed
Colors are Triple Show Chrome, or Gloss Black.
And don't forget your Supercross BMX RETRO Pads , or the Supercross BMX Retro Stem to complete the build.
Estimated Ship Date is May 15th, 2020. All orders placed will be allocated out of the production and shipped around that time.