Supercross BMX | The Envy BLK v1.1 - Carbon Fiber BMX Race Frame

1 item left
NOT ALL CARBON IS CREATED EQUAL

Just as with aluminum and steel, there are different grades of material for different strengths and needs. We have been working with some of the worlds leading carbon suppliers on the ENVY BLK for almost 4 years, ensuring that our High Modulus / Nano Tube Carbon is the best material available to build you the Lightest, Stiffest, Fastest Carbon Race Frame Possible.

People ask is Carbon a “Fad”. It is the same type of people who asked if Aluminum was a fad. Look at the track today, 90% or more of all the race bikes are Aluminum. Carbon is the next level progression, and with the technology advancing as it has with the new Nano Alloy resins, High Modulus Weaves, High Compaction molding processes etc... You can see why Carbon is the direction everyone is headed.

When we first started working on our new Carbon Frame in 2007, we ended up choosing Aluminum, as the Tubing we were able to get from Easton® at the time allowed us to build a Lighter, Stiffer, and Faster frame with Aluminum. And with that, in 2009 we introduced the Supercross ENVY which has been the lightest production race frame in the world for the last 5 years and counting.

But times change, and the advancements in carbon materials and building technology have led us to produce the new ENVY BLK. It is the most advanced Supercross Frame built yet. From it’s High Modulus Carbon, the Low Void compaction, and Nano Alloy resins, it seriously uses Formula 1 and Fighter Jet Technology to build you a Superframe.

All the sheets of Torray T700s Pre-Preg Material is precision cut to exact shapes and then hand laid into our STEEL compression molds which hold our material forms in the 3d optimized shapes needed for the ultimate in strength and stiffness, all while allowing the compliant ride you are looking for to ensure powerful gate starts and ultra fast cranking for the 3rd and 4th pedals.

Available in Junior , Expert . Expert XL and the new Expert XXL sizes.

Colors vary with paint run. Please see the above options for current available colors.

If you are serious about wanting to win, and want only the best, be sure to look at an ENVY BLK v1.1 at your favorite Supercross BMX dealer when shopping for your new frame. We guarantee you will be impressed.

Please note, the Frame is sold Frame Only.

Please click here to find the forks you would like to match up to your ENVY BLK.
GEOMETRY

 

ENVY BLK v1.1  Carbon Junior Expert Expert XL Expert XXL
A. Top Tube Length 18.5" 19.5" 20" 21"
B. Chainstay length 12.5" 13.75" 14.0" 14.25"
C. Steertube Angle 73.5º 74º 74º 74º
D. Seat Tube Angle 70º 70º 70º 70º
E. Bottom Bracket Height 10.7" 11.2" 11.2" 11.25"
Seat Post Size 22.2mm 22.2mm 22.2mm 22.2mm
Headset Type Campy Integrated

( 45x45 Bearings Can use 1" or 1 1/8" Fork depending upon the bearing set )
Campy Integrated

( 45x45 Bearings Can use 1" or 1 1/8" Fork depending upon the bearing set )
Campy Integrated

( 45x45 Bearings Can use 1" or 1 1/8" Fork depending upon the bearing set )
Campy Integrated

( 45x45 Bearings Can use 1" or 1 1/8" Fork depending upon the bearing set )
Wheel Size 20" X 1 1/8" 20" X 1 3/8" 20" X 1 3/8" 20" X 1 3/8"

* Specifications will vary depending upon your choice of Fork, Tire and Rim selection. Measurements are based off of a Supercross Fork and equal size (ie. 20X1.75 front and rear) tire combination. Specifications subject to change without notice.
 

Subscribe