Supercross BMX SpinDrive Mini Pro Cassette Hubs

Supercross SpinDrive Mini Pro Cassette Hubs have been in development for quite some time. The first ones were tested by Mikey Day and Randy Roberts almost 6 years ago. And Randy is still running his.

Starting with a lightweight 6061 shell, a 7075 T-6 Oversize internal Axle, and 4130 Cro-mo Axle studs, you have the start of a very light weight and durable hub. Add in some sealed bearings, double wide pawls and re-inforced pawl springs and you have a race quality hub right out of the box.

For 2008 we updated the hubs to go from the thread on track style of gear we had been using to a easier to remove and install splined driver that is compatable with all Shimano® and Shimano Compatable rear cogs. By going with the splined type of driver it now makes gear changes in between motos easier than ever to fine tune your bike for the perfect gear ratio.

Available in 36 and 28 hole drillings, the SpinDrive Mini Pro Cassettes come stock with a 14t cro-mo gear. Gears are available in sizes from 14t to 18t in both 7075 T-6 Aluminum and 4130 Cro-mo.

MSRP for the Front Hub, Rear Mini Cassette Hub and a 14t cro-mo gear is only $239.95

Please check with your local Authorized Supercross Dealer or one of our Approved Mail Order Outlets and if you still have trouble finding them you can always order direct by clicking below.